EZ Computer Help.Org » Cell Phone

How to replace the iPhone 4 battery

EZ Helper — Tue, 25 Jan 2011 19:10:48 +0000

This is a great video on How to replace your iPhone 4 battery. Just watch the steps and you will be all charged up with a new longer lasting battery.

Before disassembling your iPhone, be sure your iPhone is powered off and the silent switch is on.

1. Locate and eject the sim card.

2. Hold your iPhone on the end to locate two small screws on either side of the dock port. Remove the two 3.6 mm Phillips screws next to the dock connector.

3. Push the rear panel toward the top edge of the iPhone. Remove the rear panel from the iPhone.

4. Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.

5. Use an iPod tool to carefully pry the battery connector up from the ends closest to the top and bottom edges of the iPhone.

6. Remove the antenna contact from the iPhone.

7.Use the clear plastic pull tab to lift the battery out of the iPhone. Remove the battery.

How to replace the iPhone 4 battery is a post from: EZ Computer Help.Org

How to Replace HTC Incredible Droid LCD Screen Repair Guide

EZ Helper — Thu, 12 Aug 2010 21:11:22 +0000

In this video we show how to replace a cracked or broken LCD screen to repair the HTC Incredible Droid google phone. This is very easy to do!

Check RepairsUniverse.com for more info or just click the Amazon Link.

How to Replace HTC Incredible Droid LCD Screen Repair Guide is a post from: EZ Computer Help.Org

AT&T voicemail unsecured by default? YES

EZ Helper — Sun, 24 Jan 2010 21:11:58 +0000

This month my cell phone plan with Verizon wireless came to an end. I must say that I was happy with Verizon service. I had very good reception, call quality and few dropouts.

After a lot of research I decided to change to AT&T Wireless for the new plan. The main reason for changing was AT&T had the phone I wanted, the Tilt.

As I started setting up the voicemail, the system asked me to create a voicemail password. Going to the end of the setup process, it was time to check and see if everything worked. I used a different phone, called my number and left a voicemail. 2 minutes later my voicemail notification came on. To check your voicemail on AT&T you hold down the #1 key and it will AutoDial the voicemail.

To my surprise it went straight into the voicemail without asking for a password. I couldn’t believe it; the voicemail password authentication was turned off by default!

Next I called AT&T to see if it could be turned on. After the first customer service guy telling me there was no way to change it, I was forwarded to a better trained costumer service agent; he told me the steps to follow.

First call your AT&T voicemail by pressing and holding the number 1.

Once you’re in the voicemail press:
4 Personal options – next press
2 Administrative options – next press
1 Password options – next press
2 Turn password On or Off (turn it to on)

For better security AT&T should have this turned ON in the Default setting. Anyone can get your AT&T phone, turn it on and press 1 to listen to all your voicemail. Even when the phone is lost or broken, if the sim card works and they have a phone with a sim slot, that’s all someone needs to check your voicemail. But as times change and security is thought of as inconvenient, more and more we will see others stealing people’s personal or business information.

AT&T voicemail unsecured by default? YES is a post from: EZ Computer Help.Org

AT&T Tilt 8925 User Manual Switch your device to Sleep mode

EZ Helper — Tue, 07 Apr 2009 15:46:25 +0000

Switch your device to Sleep mode
Quickly pressing the POWER button turns off the display temporarily and switches your device to Sleep mode. Sleep mode suspends your device to a low power state while the display is off in order to save battery power.
Your device also automatically goes into Sleep mode when you leave the device idle after a certain amount of time.
To specify the timeout period before your device goes into Sleep mode
1. Tap Start > Settings > System tab > Power > Advanced tab.
2. Under On battery power, make sure the Turn off device if not used
for check box is selected.
3. Select the battery timeout period, then tap OK.
You will still be able to receive messages and calls while your device is in
Sleep mode. Pressing the POWER button again or new incoming calls/
messages will wake up your device.

AT&T Tilt 8925 User Manual Switch your device to Sleep mode is a post from: EZ Computer Help.Org

AT&T Tilt 8925 User Manual Personalizing the Today Screen

EZ Helper — Sun, 08 Mar 2009 07:49:37 +0000

Personalizing the Today Screen
The Today screen shows your upcoming appointments, active tasks, and information about incoming messages. You can customize what to display on the Today screen.

To customize the Today screen
1. Tap Start > Settings > Personal tab > Today.
2. On the Appearance tab, select the desired theme for the background of the Today screen.
3. On the Items tab, select the items you want to appear on the Today screen.
Tip To change the order of items displayed on the Today screen, tap the item, and tap Move Up or Move Down.

To use a custom background image
You can use one of your own pictures as the background image on the Today screen. Be aware that pictures can affect the readability of text on the Today screen.
1. Tap Start > Settings > Personal tab > Today.
2. Select the Use this picture as the background check box, and tap Browse to view a list of your picture files.
3. Tap the file name of the picture you want to use.
4. Tap OK.

To set options for displaying appointments on the Today screen
If you have a large number of appointments, you may want to specify the kind of appointments that are displayed on the Today screen.
1. Tap Start > Settings > Personal tab > Today.
2. Tap the Items tab.
3. Select Calendar and tap Options.
4. Do any of the following:
• Select Next appointment to show only the next appointment in your schedule, or Upcoming appointments to show multiple appointments.
• Clear the Display all day events check box if you do not want to display all-day events.

To set options for displaying tasks on the Today screen
If you have a large number of tasks, you may want to specify the kind of tasks that are displayed on the Today screen.
1. Tap Start > Settings > Personal tab > Today.
2. Tap the Items tab.
3. Select Tasks and tap Options.
4. Do any of the following:
• Under Display number of, select the type of tasks you want to appear on the Today screen.
• In the Category list, select whether to display only tasks assigned to a specific category or to display all tasks.

AT&T Tilt 8925 User Manual Personalizing the Today Screen is a post from: EZ Computer Help.Org